Huabao Golden Samurai UPS Power 2020-7-4

Introduction: When the UPS battery is used improperly, especially when it is overcharged, it will cause problems such as unsmooth vents and aging of the line, and there may even be safety hazards.

When the UPS power battery is used improperly, especially when it is overcharged, it will cause problems such as unsmooth vents and aging of the line, and there may even be safety hazards.

1. When charging the UPS battery, pay attention to prevent excessive current and overcharging. The installed battery needs to adjust the rated voltage of the generator, while the battery charged in the charging room needs to control the charging current and charging time.

2. When in use, avoid sparks, and the connection between the wire joint and the electric pile must be firm. When repairing, ensure the welding quality of the plate assembly.

3. Both the computer PC terminal and the mobile phone APP terminal can obtain data information through DSP digital control technology, and can also provide battery abnormal alarms.

4. When operating under low temperature conditions, the starter cannot be used continuously. The combination time of the starter should not exceed 5~10S, and the interval time of 10S~15S should be maintained for starting.

5. During operation, in order to discharge the generated gas from the vent hole of the filling port in time, so that the internal air pressure will not be too high, the filling cap needs to be maintained in a tightened state, and the vent hole must be cleared.

During the charging process, maintain the stability and reliability of the connection points. If the connection points are loose, sparks will appear, which will cause the UPS battery to swell and form a hidden danger.